TC-20E 20T automatic road strength tester with rebound test

main features 

This machine combines advanced computer technology with high-precision sensor technology, making it easy to operate, with accurate test data and stable performance. The instrument is equipped with overload protection. Instrument automatic testing, automatic recording, no need to manually pull the gear lever to change the test speed, the system will automatically distinguish the test and no-load speed and switch automatically. This host adopts a two column support, with a reasonable mechanical structure to ensure the accuracy of the instrument. The design is simple and elegant, and after installing a pressure sensor, it can be used to measure the unconfined compressive strength, splitting test, CBR test, soil rebound modulus test (strength meter method), inorganic binder rebound modulus test (top surface method), and other tests that require vertical loads. Manual operation can also be performed during power outages or when there is no power available.

 

Main technical parameters

Maximum rated load 200KN

The maximum lifting distance of the screw is 200mm

Electric speed fast 50mm/min Slow speed: 1mm/min

Manual speed 0.2mm/lap

Pressure measurement range 0-200.0KN

Working voltage host 380V ± 10% (three four wire) controller 220V ± 10%

Working temperature 10-30 ℃ Working guaranteed temperature: 5-35 ℃

External dimensions 720mm * 720mm * 1680mm

Whole machine weight 250Kg