TCKR-2 Flammability Test Furnace for Building Materials

Applicable scope

The touch screen control building materials flammability test furnace adopts a stainless steel box, which is an upgraded product with touch screen control, sample controllable automatic lifting, and Bensheng lamp adjustable forward and backward functions added on the basis of the old JCK-2 product. It is a high configuration building materials combustion level testing instrument produced strictly in accordance with the national standard GB8626-2007. (The red section represents the mandatory parameters for third-party testing units to accept now.)

The flammability test furnace for building materials is a device that directly impacts vertically placed specimens with a small flame in a normal combustion environment to determine the flammability of building products. The flammability test furnace for building materials utilizes the principle of Kleinbrenner in Germany, and is used to determine the combustion performance of B-grade building materials under direct impact of a small vertical flame (i.e. for determining the combustion performance/flame retardant grade of building materials).

 

Product functional characteristics

1. Ergonomic operation design, all experiments are completed through touch screen operation, with high degree of automation. It can store past test results and access past test data;

2. The servo motor drives the controllable automatic lifting of the sample rack;

3. The Bunsen lamp can be adjusted for forward and backward movement;

4.1.5mm stainless steel plate box body;

5.2 Tempered heat-resistant glass doors with dual angle observation and testing, double (with lock) for convenient and practical use

6. High pressure automatic ignition, durable combustion;

7. The ignition source can automatically tilt 45 degrees;

8. The flame height is adjusted through a precision adjustment valve;

9. The sample holder can be moved up, down, and back and forth;

10. Equipped with two types of sample clamps.

11. Flame measuring scale;

12. High degree of automation, accurate experimental data, and easy operation;

13. Box size: width 835 x depth 400 x height 815mm

14. Material: 1.5mm stainless steel

15. The bottom of the box is a flat natural ventilation opening, which is composed of 5cm * 5cm square ventilation openings (a true 1.5mm thick steel plate ventilation opening, 50mm high) to maintain a smooth airflow through

16. Exquisite workmanship, truly solder free process

17. Touch screen display:

Size: 7 inches, effective display size: 15.5cm in length and 8.6cm in width;

Resolution: 800 * 480

Communication interface RS232, 3.3V CMOS or TTL, serial port mode

Storage capacity: 1G

Using pure hardware FPGA driver display, with "zero" startup time, can run on power

Adopting M3+FPGA architecture, M3 is responsible for instruction parsing, and FPGA focuses on TFT display

The main controllers all use low-power processors and automatically enter energy-saving mode